The Fujifilm X-E4 is one of my absolute favorite Fujifilm cameras. There was a lot of demand for it, then, inexplicably, Fujifilm discontinued the X-E4 while there was still a fairly lengthy backorder list. According to Fujirumors, Fujifilm is working on the X-E5 right now, possibly to be released sometime in 2025. There’s a reasonable chance that Fujifilm will read this, so I thought I’d take the opportunity to express my wish-list for the camera.
The Fujifilm X-E1 was my gateway into the Fujifilm system. The camera, which was released in 2012 and was Fujifilm’s second interchangeable-lens X-series camera (only preceded by the X-Pro1), was praised for its beautiful retro rangefinder design (nicknamed “Sexy One”), but also criticized for its sluggish performance (some of which was rectified in firmware updates). The X-E1 was fairly quickly replaced by the X-E2, and a minor updated version called the X-E2s was released at the end of the X-Trans II lifecycle (beginning the pattern of X-E cameras released near the end of a sensor generation). While the X-E series has a history of somewhat slow sales, the cameras tend to be much beloved by those who own them. The X-E4 did not experience sluggish sales (in fact, Fujifilm was unable to meet the strong demand); however, it was discontinued anyway, presumably because Fujifilm did not secure enough parts to produce more.
I love the Fujifilm X-E4 because it is small and lightweight, which makes it more pleasant to carry around as an everyday camera. When traveling, there’s limited space for gear in the bag, and tough choices must be made; the X-E4 takes up less room than other bodies, so it’s more likely to be chosen over larger and heavier cameras. In fact, the X-E4 and X100V (and now X100VI) have been my go-to travel cameras since 2021. I also appreciate its clean minimalistic design of the camera.
Fujifilm could simply engrave “X-E5” on the new camera and include the X-Processor 5, but keep everything else completely identical to the X-E4, and it would sell. If it ain’t broke, don’t fix it. People wanted the X-E4 but simply couldn’t get it. An X-E5 that is just an X-E4 with the new processor and the new film simulations would do quite well, I’m certain of it. The less Fujifilm changes, the better.
With that said, there are some things that would make the X-E5 even better than the X-E4. I do feel the minimalistic approach was perhaps a bit too minimalistic. The five key changes that I would make if I were one of the designers are: 1) bring back the M/C/S switch, 2) add an ISO Ring around the Shutter Knob like the X100 and X-Pro series have, 3) add back the rear command dial, 4) improve the EVF resolution, and 5) add a small grip to the front like the X-E3 has.
These might be unpopular opinions, but I would use the “old” 26mp X-Trans IV sensor in combination with the X-Trans V processor (like the X-S20); IBIS is unnecessary, and should be avoided for weight and cost reasons; the camera doesn’t need to be weather-sealed. Keep the X-E5 as similar to the X-E4 as possible, just refine it a little with a handful of small improvements.
There’s a massive opportunity that I believe Fujifilm has largely ignored. One of the biggest advantages of APS-C over full-frame is size/weight. There are tradeoffs with anything, and APS-C seems to strike a near perfect balance of size/weight, performance, image quality, and value. While full-frame cameras have been shrinking lately, APS-C has not; instead, the APS-C advantage has been shrinking. This is easily rectified, though, and the X-E5 is one step towards that, but it needs to be kept small, light, and affordable. The other key piece that’s missing are pancake lenses.
Yes, there’s the exceptional Fujinon XF 27mm f/2.8 R WR; however, it’s not often readily available for purchase. Likely, you have to add yourself to a backorder list and wait awhile. There’s also the sort-of pancake (Japanese pancake?) Fujinon XF 18mm f/2 R, but it is old, overpriced, and in desperate need of an update. Otherwise, there aren’t many options—at least not natively; however, there are some 3rd-party pancake lenses that have recently appeared, which is good. Fujifilm needs to add a few more pancakes to the Fujinon lineup, and not be satisfied with just two.
I think a total of five pancake lenses would do the trick. The 27mm f/2.8 already exists, but simply needs to be made available. The 18mm f/2 also already exists, although I would strongly encourage Fujifilm to update it. The three lenses that, in my opinion, Fujifilm should add to the pancake lens lineup are 15mm f/3.5, 23mm f/2.8, and 40mm f/2.8. That gives a good variety, and all five would together make for a fantastic kit.
Since Fujifilm already has two 23mm lenses—the 23mm f/2 and 23mm f/1.4—they might consider something else that they don’t have, perhaps 20mm or 25mm, but definitely something in-between 18mm and 27mm. Instead of 40mm, a longer focal-length could alternatively be chosen, such as 45mm f/3.5 or 55mm f/4. The point is to have something wider than 18mm, something more telephoto than 27mm, and an option in-between the 18mm and 27mm.
A small and lightweight camera—such as the X-E5—combined with a handful of small lenses would make an ideal kit for travel and walk-around photography. It would clearly illustrate a significant advantage of APS-C over full-frame—imagine a camera and five-lens kit that could all fit into a small camera bag! I have no doubt that it would be successful, but it would require that Fujifilm clearly articulate why a small camera with small lenses should be desirable.
I don’t know if the “right” people at Fujifilm will read this, or, if they do, if they’ll listen. But, just in case, I wanted to make sure to get my opinions out there. Now it’s your turn! What would you like to see in a Fujifilm X-E5? What pancake lenses do you think that Fujifilm should make? Let me know in the comments!